GEPRC CINEBOT30 3" HD 6S W/ DJI O3-TBS 6s
Description
GEPRC CINEBOT30 3" HD 6S FPV DRONE W/ DJI O3 SYSTEM
*Product may vary from pics.
The GEPRC Cinebot30 is a new generation of Cinematic FPV drones developed by GEPRC team. The high-strength 7075 aircraft-grade aluminum alloy bracket for FPV camera is a combination of classic engineering and aesthetics. The newly polished gimbal damping module can easily fix high-frequency vibration and jello issues. This drone can be mounted with GEPRC Naked GoPro Hero 8, GoPro Black Bones, Insta 360 GO2 and other cameras for a stable and clear image!
FEATURES
- Aviation 7075 aluminum alloy camera mounting bracket and fuselage aluminum column
- Powerful 1804 motors with surging torque to deal with ultra-low altitude
- impact-resistant PC material for injection molding
- Design that combines engineering and aesthetics
- Highest image quality is 1080P 60FPS
- Delay is as low as 30 milliseconds
- Tuned by GEPRC professionals
- Highest bit rate is 50MBPS
- GEP-F722-45A AIO V2
- Quick-disassembly
- DJI O3 Air Unit
- Jello reduction
DJI O3 AIR UNIT
Integrating DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features state-of-the-art DJI transmission technology enclosed in a lightweight, compact design. See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance - it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity and enjoy even more sky-high travels!
HIGH STRENGTH COMPONENTS
This drone adopts high-strength one-piece injection-molded propeller guard and high-toughness and impact-resistant PC material for injection molding. A ring-shaped Cob light strip is embedded in the propeller guard, and the light effect is carefully tuned. High-strength grain-cut carbon fiber sheets mean the overall strength of the fuselage is upgraded again!
HIGH SPEED MOTORS
The Cinebot30 is equipped with a powerful 1804 motor with an optimized motor magnetic circuit and surging torque, which can easily cope with ultra-low altitude shooting. With the HQ prop T76mm*3 propellers, it gets the lowest noise effect in its class.
MAKING IT SIMPLE
Using a GEP-F722-45A AIO V2 flight controller provides a higher performance redundancy, with easy handling of unexpected situations. The finely polished frame design uses only 6 screws to separate the aircraft top plate and protection frame, which provide a simple removal to replace accessories.
SPECIFICATIONS
- Recommended Battery: LiPo 6S 850mAh-1100mAh(6S Version)
- Video resolution: 4K@50/60fps, 2.7K@50/60/100/120fps, 1080p@50/60/100/120fps
- Motor: SPEEDX2 1804-2450KV (6S Version)
- Weight: 234.7.2g (excluding battery, the above are TBS Nano RX version)
- Receiver: PNP, TBS Nano RX, ELRS 2.4G
- Model: Cinebot30 HD Quadcopter
- Charger connector: XT60H-M
- Propeller: HQ prop T76mm
- FC: GEP-F722-45A AIO V2
- MCU: STM32F722RET6
- Bottom plate: 1.5mm
- Isolation Plate: 2mm
- Wheelbase: 127mm
- VTX: DJI O3 Air Unit
- IMU: ICM-42688-P
- Frame: GEP-CT30
- Main plate: 3mm
- Antenna: DJI O3
- Camera: DJI O3
- Brand: GEPRC
PACKAGE CONTENTS
- 1x GEPRC CineBot30 3" HD FPV Drone w/ DJI O3 (Choose 4S or 6S and Receiver)
- 1x GoPro camera mount holder
- 1x Battery strap M15*200mm
- 1x Battery strap M15*220mm
- 2x HQProp T76MM（pair）
- 2x Battery Silicone Pads
- 1x Set of screwdrivers
- 1x Antenna fixed tube
- 1x Set of screws
IMPORTANT
The DJI Remote Controller is recommended for beginners since you won't need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don't choose to use the DJI Remote Controller, you must use your own receiver for your transmitter, then bind to your own radio as usual.