HappyModel  |  ID: I-R7-2

Happymodel Moblite7 Walksnail 1S 75mm Digital Whoop V3

$322.99
Shipping calculated at checkout.

4 in stock, ready to ship
5A10084

Introducing the Happymodel Mobilite7 Walksnail edition. This ELRS Tinywhoop delivers digital quality in a compact and durable package.

Package Includes:

Item Name Qty
Mobula7 v4 75mm frame +Canopy 1
SuperX HD ELRS AIO flight controller 1
Happymodel 1002 KV20000 Unibell brushless motor 4
Gemfan 1610-2 bi-blades propeller(4cw+4ccw) 1
Walksnail Avatar nano HD camera 1
Walksnail Avatar mini 1s tx module 1
Spare Canopy 1
Propeller disassemble tool 1
Screw driver 1
Flight

 

Specifications:

Brand Name: Happymodel

Model: Moblite7 Walksnail V3

Frame wheelbase: 75mm

Weight: 34.5 gram without battery

Size: 98mm*98mm*48mm

UART ELRS v3.0 ready

Compatible with 1S Lipo battery or Lihv battery

Battery Plug: GNB A30

Onboard blackbox ready

Specifcations:

Flight controller

SuperX HD ELRS

Betaflight 4.4.2 firmware ready
Firmware target: CRAZYBEEF4DX
MCU:STM32F411CEU6 (100MHz, 512K FLASH)
Sensor: BMI270 or ICM42688P (SPI connection)
Power supply: 1-2S Lipo Lihv battery input (DC 2.8V~8.7V), only support 1s input for this drone
Built-in 12A(each) Blheli_S 4in1 ESC Dshot300 read
Built-in UART elrs receiver , elrs v3.0 ready, support WIFI and pass-through firmware update
Bluejay ESC Firmware ready
Built-in 5V 1A BEC
Built-in voltage detection
No betaflight analog osd chip
Onboard 4in1 ESC Power supply: 1-2S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support ESC-Configurator and BLHELI_S Suite configurator
Factory firmware: Z-H-30 – Bluejay, 0.19, 48kHz
Default protocol: DSHOT300
Onboard UART ExpressLRS 2.4GHz Receiver RF Frequency: 2.4GHz
Antenna: enameled copper wire 31mm length
Telemetry output Power: <12dBm
Receiver protocol: CRSF
Default firmware version: ExpressLRS V3.0.1
The same hardware with Happymodel EP1 receiver
Could update firmware via ExpressLRS configurator or WIFI or Betaflight pass-through
Motor Model: 1002 20000KV
Configu-ration:9N12P
Stator Diameter:10mm
Stator Length:2mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ13.5mm*12.5mm
Weight(g):2.5g
No.of Cells(Lipo):1S only
Propeller Gemfan 1610-2 Bi-blades Weight:0.24g
Material: PC
Pitch:1 inch
Props Dia:40mm
Center Hole Dia:1.5mm
VTX Model: Avatar mini 1s module
Communication Frequency: 5.725-5.850 GHz
Transmitter Power(EIRP): FCC:<25.5dBm; CE:<14dBm; SRRC: <20dBm;MIC:<25dBm
l/o Interface: JST1.O*6(Power in)JST1.O*4(USB)
Mounting Holes: 25.5*25.5 mm
Dimensions: 33*33*6.5 mm
Storage: 8G
Recording: 1080p/720p
Weight: 6.8 g
Operating Temperature: -20-40℃
Channels: 8
Wide Power lnput: 3.1V-5V
Supported FC System: Betaflight
OSD: Canvas mode
Bitrate: 25mbps / 50mbps
Latency: Average delay 22ms
Antenna connector: IPEX
Camera Model: Avatar nano
lmage Sensor: 1/2.7”Inch
Resolution: 1080P/6Ofps,720P/120fps,72OP/6Ofps
Ratio: 16/9 4/3
Lens: 2.1mm
FOV 170°
Aperture: F2.0
Shutter: Rolling shutter
Min.Illumination: 0.001Lux
Weight: 3.5g
Dimensions: 14*14*17mm
Coaxial Cable: 45mm

 

Default factory dump file:
Moblite7 Walksnail 1S 75mm digital HD brushless whoop v3 dump file

Returns

Visit our return policy here.

Product Questions

Contact us via the chat bubble in the bottom right corner, and we will respond as soon as possible!

Estimate shipping

Enterprise Quotes

Need a quote for a commercial product? Get in touch with us here.

Product Suggestions

Not sure what drone is right for your needs? Contact us via email or the chat bubble with your questions.

Enterprise Demos

Purchasing a commercial drone and want a demonstration? Contact us for more information.