Flywoo
Flywoo GOKU GN745 45A AIO 32bit (MPU6000) V3
Since its launch, the GOKU GN745 AIO has stood as Flywoo's top-tier AIO product, earning widespread acclaim from Betaflight, INAV, and Ardupilot enthusiasts. Now, we're excited to introduce the latest upgrade in this series—the V3 version! The V3 boasts a new ESC two-in-one drive solution, enhancing the continuous current capacity to 45A and improving the overcurrent protection capability of the motor pads, resulting in a more powerful overall performance. Furthermore, the V3 version significantly advances in terms of convenience, featuring 4 new direct-plug Uart ports and adopting a Type-C interface for easier connectivity.
Package Includes:
1x UNICON UPL Capacitor 25V 470UF
4x M2x6.6 Shock-Absoring Ball
4x M2 Rubber Ring
1x XT30 Power Cable
1x DJI O3 Connection Cable
1x VTX & Camera Connection Cable
1x Receiver Connection Cable
1x GPS Compass Connection Cable
Highlights:
- Performance: Utilizes STM32F745 chip, AM32 firmware, and MPU6000 gyro, with dual BEC, barometer, black box, supports 7 serial ports and I2C.
- Plug & Play: Compatible with O3 air unit, GPS, Camera, Analog VTX, and Receiver without the need for soldering.
-
Type-C Interface: Features a Type-C interface for improved compatibility and easier connection.
-
Compatibility: Supports BF, INAV, and Ardupilot platforms.
-
New Layout: New ESC two-in-one drive solution, with a continuous current up to 45A.
-
Better Protection: Larger motor pad area with improved overcurrent protection.
Specifications:
- BF Flight Controller Firmware: FLYWOOF745AIO
- INAV Firmware: FLYWOOF745
- Ardupilot Firmware: FLYWOOF745
- MCU: STM32F745 32-bit processor,216MHz, 1MB Flash
- IMU: MPU6000 (SPI)
- Barometer: SPL06
- USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
- 7 hardware UARTS (UART1,2,3,4,5,6,7)
- Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only.
- PPM and PWM receivers are not supported.
- Onbord 8Mbytes for Blackbox logging
- 5V Power Out: 2.0A max
- 3.3V Power Out: 0.5A max
- Dimensions: 33.5x33.5mm
- Mounting Holes: Standard 25.5/26.5mm square to center of holes
- Weight: 9.4g
Onboard 4in1 ESC
- Support AM32
- Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600,Dshot1200
- Input Voltage: 2-6S Lipo
- Continuous Current: 45A
- Firmware: GOKU_F4A32_PRO
Info:
Returns
Visit our return policy here.
Product Questions
Contact us via the chat bubble in the bottom right corner, and we will respond as soon as possible!
New from the Drone Dynamics Blog
Read up on the latest info in the drone world.
FPV VS DJI: What's Right For You?
It's the age-old question of the drone hobby — Do I get a camera drone, or do I dive into...
DJI Air 3S - The Best Hobby Grade Camera Drone?
In July 2023 DJI Released the Air 3, a powerful dual camera drone ideal for travellers and hobbyists interested in...
SHARGE: Keeping Your Devices Charged
We've all been there - You need to call someone on the go, and you take out your phone only...
Enterprise Quotes
Need a quote for a commercial product? Get in touch with us here.
Product Suggestions
Not sure what drone is right for your needs? Contact us via email or the chat bubble with your questions.
Enterprise Demos
Purchasing a commercial drone and want a demonstration? Contact us for more information.