HappyModel
Happymodel Mobula6 2024 V2 (ELRS 2.4)
Tinywhoops are perfect for new pilots or those looking to fly indoors during the colder seasons. The Mobula6 is an excellent 65 mm whoop for indoor and outdoor flying on a budget!
Package Includes:
1x Mobula6 2024 (ELRS 2.4)
1x Hardware Packet
Specifications:
Brand Name: Happymodel
Item Name: Mobula6 2024 1S 65mm ultra light micro FPV Whoop
Wheelbase: 65mm
Size: 81mm*81mm*37mm
Weight: 17.7g
| Motor | Mode: SE0702 KV28000 Configu-ration:9N12P Stator Diamter:7mm Stator Length:2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.*Len):Φ9.5mm*14mm Weight(g):1.46g No.of Cells(Lipo):1S only |
| Propellers | Materials: PC Inch: 31mm Pitch: 0.8 in Weight: 0.21g Mount hole diameter: 1mm |
| Flight controller | SuperX ELRS AIO 5-IN-1 Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4 Sensor:BMI270(SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw (MSP control) Built-in UART ExpressLRS v3.0.0 Built-in voltage meter sensor , voltage meter scale 110 Built-in current meter sensor , current meter scale 1175 |
| Onboard 4in1 ESC | Power supply: 1S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: Bluejay v0.19.2 Default protocol: DSHOT300 Recommend ESC Startup power value to min1100/max1200 |
| Onboard Serial ExpressLRS receiver | Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V3.0 RF Frequency: 2.4GHz Antenna : Enameled copper wire antenna Telemetry output Power: <12dBm Receiver protocol: Serial_based CRSF Compatible with ExpressLRS V3.x.x TX Module Could flash single ELRS receiver firmware by Wifi ExpressLRS firmware target: ExpressLRS firmware target: HappyModel AIO 2.4GHz RX+VTX (ExpressLRS web flasher) Available from Expresslrs version 3.4.0 RC2 |
| Onboard 5.8g VTX | Firmware version: OPENVTX MSP VTX PIT Mode support Channels:40ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v): <650ma (400mw) Antenna connector: U.FL |
| FX17-B Camera | Model:FX17-B Image Sensor: 1/3″ CMOS Horizontal Resolution: 800TVL FOV 150° Signal System: NTSC Net Weight: 1.5g Dimensions: L14mm*W14mm*H13mm |
V2.0/V1.0 Factory Dumps from Happymodel:
Mobula6 2024 factory firmware 4.4.0
Dump file for Mobula6 2024 with Betaflight 4.4.0
Retours
Consultez notre politique de retour ici.
Questions sur les produits
Contactez-nous via la bulle de chat dans le coin inférieur droit, et nous vous répondrons dans les plus brefs délais !
Nouveautés du blog Drone Dynamics
Informez-vous sur les dernières informations dans le monde des drones.
FPV VS DJI: What's Right For You?
It's the age-old question of the drone hobby — Do I get a camera drone, or do I dive into...
DJI Air 3S - The Best Hobby Grade Camera Drone?
In July 2023 DJI Released the Air 3, a powerful dual camera drone ideal for travellers and hobbyists interested in...
SHARGE: Keeping Your Devices Charged
We've all been there - You need to call someone on the go, and you take out your phone only...
Citations d'entreprise
Besoin d'un devis pour un produit commercial ? Contactez-nous ici.
Suggestions de produits
Vous ne savez pas quel drone est le plus adapté à vos besoins ? Contactez-nous par e-mail ou via la bulle de discussion avec vos questions.
Démonstrations d'entreprise
Vous achetez un drone commercial et souhaitez une démonstration ? Contactez-nous pour plus d'informations.
){kind=link}