GEPRC Taker F405 BLS 100A 8S Stack

Equipped with the widely used STM32F405 chip and the advanced 42688-P gyroscope, this stack features 16M black box storage and an integrated LC filter for optimal signal clarity. It includes an upgraded Type-C USB interface and is compatible with direct connection to the DJI Air Unit. Paired with the TAKER H100_8S_BLS 100A 4IN1 ESC, featuring Dual MOS for high current and smooth flight performance, it supports 8S LiPo batteries. The straightforward installation design incorporates a shock absorber to stabilize the gyroscope, while dual independent BECs provide 12V@3A and 5V@3A outputs.

Package Includes:

1 x GEP-F405-8S Flight Controller

1 x TAKER H100_8S_BLS 100A 4IN1 ESC

1 x Electrolytic capacitor(50V 4700uF)

1 x DJI connection cable(SH1.0 6pin 100mm)

2 x FC adapter cable(SH1.0 8pin 30mm)

1 x Receiver silicone cable(SH1.0 4pin 150mm)

1 x Camera connection cable(SH1.0-SH1.25 3pin 135mm)

1 x VTX connection cable(SH1.0 4pin-6pin 100mm)

1 x XT90 battery plug

1 x Red and black power cable(10AWG 240mm)

4 x M3*30 screws

4 x M3*25 screws

8 x Nylon nuts(M3)

12 x Silicone anti-shake pads(M3)

Specifications:

GEP-F405-8S Flight Controller

MCU：STM32F405

IMU：ICM42688-P(SPI)

Air Unit Connection：Direct plugging into DJI Air Unit

Black Box：16M onboard

Barometer: support

Motor outputs：M1-M8

USB Interface：Type-C

OSD：BetaFlight OSD w/ AT7456E chip

BEC：5V@3A,12V@3A dual BEC

Firmware Target：GEPRCF405_BT_HD

Size：37x37mm

Mounting: 30.5×30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle

Input Voltage：3-8S LiPo

UART：6 UARTs

Power Filter：Integrated LC filter

Weight：8.3g

TAKER H100_8S_BLS 100A 4IN1 ESC

Input Voltage: 3-8S Lipo

Ammeter: Support

Calibration value：200

Continue Current：100A

Burst Current：105A（5 second）

Support Protocol: Dshot 150/300/600

Size：56.3*61.1mm，hole30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.

Weight: 28.8g

Target: B_X_3

Info: