SpeedyBee
SpeedyBee F7 Mini 3-6S 8-bit Flight Controller
Introducing the SpeedyBee F7 Mini FC. This flight controller is perfect for a wide range of builds big and small.
Package Includes:
1x SpeedyBee F7 Mini 3-6S FC (No ESC Included)
1x Hardware Kit
Specifications:
|
Product Name |
SpeedyBee F7 Mini Specs |
| MCU | STM32F722 |
| IMU(Gyro) | BMI270 for current batches; MPU6000 for old batches before May 2022. |
| USB Port Type | Type-C |
| Barometer | N/A |
| OSD Chip | AT7456E chip |
| BLE Bluetooth | Supported. Used for Flight Controller configuration (MSP should be enabled with Baud rate 115200 on UART 6) |
| WIFI | Not supported |
| Flash FC Firmware Wirelessly | Not supported. Please update firmware for this FC on the PC |
| Download/Analyze Blackbox | Not supported. Please download and analyze Blackbox data on the PC |
| DJI Air Unit Soldering Pads | Supported |
| Flash(for BlackBox) | 8MB |
| Current Sensor | Supported, Scale=250 Offset=-500 |
| BetaFlight Camera Control Pad | Yes(CC pad) |
| Power Input | 3S - 6S Lipo |
| 5V Output | 6 groups of 5V output, five +5V pads and 1 BZ+ pad( used for Buzzer). The total current load is 2.5A. |
| 9V Output | 2 groups of 9V output, the total current load is 2A. |
| 3.3V Output | Supported. Up to 500mA current load. |
| ESC Signal Pads | M1 - M4 |
| UART | Full UART * 3(UART1, UART2, UART3) |
| ESC Telemetry UART | R4(UART4) |
| I2C | Not supported |
| LED Pad | Used for WS2812 LED |
| Buzzer | BZ+ and BZ- pad used for 5V Buzzer |
| BOOT Button | Used to enter DFU mode |
| RSSI Input | Not supported |
| SmartPort | Use any TX pad of UART for the SmartPort feature. |
| Supported Flight Controller Firmware | BetaFlight(Default) |
| Firmware Target Name | SPEEDYBEEF7MINIV2 for current batches(Gyro: BMI270); SPEEDYBEEF7MINI for old batches(Gyro: MPU6000) before May 2022. |
| Mounting | 20 x 20mm, 3.5mm hole diameter |
| Dimension | 30 x 30 x 7.5mm |
| Weight | 5.7g |
| Product Name | SpeedyBee 35A BLHeli_S Mini 4-in-1 ESC Specs |
| Firmware | BLHeli_S JH40 |
| Continuous Current | 35A * 4 |
| Burst Current | 45A(5seconds) |
| ESC Protocol | DSHOT300/600 |
| Power Input | 3-6S LiPo |
| Power Output | VBAT |
| ESC Telemetry | Not supported |
| Current Sensor | Support (Scale=250 Offset=-500) |
| Mounting | 20 x 20mm, 3.6mm hole diameter |
| Dimension | 35 * 35 * 5.5mm |
| Weight | 7g |
Returns
Visit our return policy here.
Product Questions
Contact us via the chat bubble in the bottom right corner, and we will respond as soon as possible!
New from the Drone Dynamics Blog
Read up on the latest info in the drone world.
FPV VS DJI: What's Right For You?
It's the age-old question of the drone hobby — Do I get a camera drone, or do I dive into...
DJI Air 3S - The Best Hobby Grade Camera Drone?
In July 2023 DJI Released the Air 3, a powerful dual camera drone ideal for travellers and hobbyists interested in...
SHARGE: Keeping Your Devices Charged
We've all been there - You need to call someone on the go, and you take out your phone only...
Enterprise Quotes
Need a quote for a commercial product? Get in touch with us here.
Product Suggestions
Not sure what drone is right for your needs? Contact us via email or the chat bubble with your questions.
Enterprise Demos
Purchasing a commercial drone and want a demonstration? Contact us for more information.
