GEPRC 4S 660mAh 90/180C HV 3.8V/4.35V LiPo Battery

Name: GEPRC 4S 660mAh 90/180C HV 3.8V/4.35V LiPo Battery
Brand: GEPRC
SKU: GEP833-C1
Price: 28.99 CAD
Availability: InStock

$28.99

结账时计算运费。

产品变体

数量

1有货

GEP833-C1

This battery is specifically designed for 2-3 inch drones, including the CineLog series. When compared to ordinary batteries, the high voltage battery offers increased energy, resulting in a longer flight time in the same usage environment. Its high energy density and discharge rate allow for a smaller volume and lighter weight for the same capacity.

Package Includes:

1x GEPRC 4S 660mAh 90/180C HV 3.8V/4.35V LiPo Battery

Specifications:

Model: GEP 4S 660mAh

Capacity: 660mAh

Configuration: 4S1P

Nominal Voltage: 15.2V

Type: LiHV

Watt: 10.03WH

Dimension: 17*32*63(mm)

Weight: 64.1g

Max cont. discharge (C-rate/current): 90C

Max Burst (C-rate/current): 180C

Charge Connector: XT30

Discharge Connector: XT30

Recommended charging current: 1C

Maximum charging current: 3C

Working Temperature Charge: 0-45°C

Working Temperature Discharge: -20-60°C

Working Humility: 65%RH +/-20%

Storage Temperature: -20-35°C

Storage Humility: 65%RH +/-20%

Life Cycle: 300+times

Application: Toys,Boats,Quadcopter

Warning:

Please read the battery parameters and instructions in detail before use.
Please don’t charge the battery unattended.
Do not overcharge (select the correct battery type before charging, the full charge voltage of single cell of LiPo battery is not more than 4.2V, and the full charge voltage of single cell of LiHV battery is not more than 4.35v).
Do not over-discharge (the single-cell discharge voltage of LIPO and LiHV batteries cannot be lower than 3.5V, over-discharging will damage the battery and cause swelling).
Don’t place the battery close to open flames or fire sources.
Keep the battery away from flammable materials when charging
Please carefully check the battery voltage and capacity before charging and use
It is forbidden to reverse the positive and negative poles of the battery (to avoid short circuit)
Do not directly touch the leaking battery. If you accidentally touch the electrolyte, please wash it with clean water immediately. If it is serious, please consult a doctor immediately.
Please dispose of the ruptured battery in time and do not reuse it
If you need to store the battery for a long time, please maintain the battery voltage at a single-cell 3.80V-3.85V. Please ensure that a charge-discharge activation is performed within 3 months to maintain the stability of the battery.
It is forbidden to disassemble and reassemble the battery or change the wiring (it is easy to cause short circuit and burning).
If a collision occurs during use, please remove the battery. Check carefully whether the battery and connector are normal.
Please charge at a temperature of 0-45℃ (make sure the charging environment is cool and ventilated, the battery will generate a certain amount of heat after use and during the charging process, and the battery that has just been used is allowed to stand and wait for the temperature to be below 45℃ before charging).