Mini Digital HS1177 CCD FPV Camera (2.8mm Len / Sony SUPER HAD II CCD 600TVL / IR Block)
Description
This is 600TVL CCD Camera for FPV Camera. People usually mount this camera to 180-250 frame directly with the screws.
Mini Camera with mounting holes (so you can mount it with angle)
Designed for Realtime FPV - Light in Weight
Specification
Resolution: CCD 600TV Lines
Sensor: 1/3” Sony SUPER HAD II CCD
Power Source: 12V
Although the manual said that 5-22V Wide Voltage is supported but we only recommend to use a stable voltage (12V) supply from a BEC which is also the voltage we test each camera before packaging.
Please only use 12-22V voltage for recent batch of goods (2016 Nov & Dec), the cameras might have noise (snow) under 12V. Please do not purchase this camera if you need to use it under 12V. Thank you for your kind attention.
Do not follow the common paper manual (if attached to the camera), the input voltage could be wrong. At your own risk if try.
OSD Supported
Len: 2.8mm
Weight: Approx 12g
Dimension: 26x26mm
Mounting (Direct Screws on Both Sides): ~29.7mm
Package includes:
1 x Mini Digital HS1177 CCD FPV Camera (2.8mm Len / Sony SUPER HAD II CCD 600TVL / 12g)
1 x Camera Stand
1 x FPV Cable
OSD Cable is INCLUDED.
** You might see "Black & White Screen" or "Blinking Screen" if the PAL and NTSC are mixed up eg. You connect a PAL camera to NTSC CCTV Appliance.
** Warning: Please use a stable 12V UBEC (RCX07-313 RCX UBEC 3A) instead of connecting the camera directly to the power source (3S Lipo), it could damage the camera and no refund / replacement will be offered, so you better test the voltage and make sure it is 12V before using it. Each camera has been tested before shipping.
** Warning: Each camera has been tested by using CCTV system to make sure it is working properly because we need to manually adjust the Len to a "clear" level before locking it up by glue/screw. The camera will burn only if you connect the + / - cables wrongly to the camera or connect an over voltage power source. Please use the default cable shipped with the camera only because not all cameras have the same pin layout on the PCB. Due to this reason, exchange/refund will be offered only after the camera is returned back to us for inspection. Thank you for your kind attention.